Jerry Curtin Limited
Jerry Curtin Ltd doesn`t merely offer machines in the market: we listen to our customers - both buyers and sellers - and set out to find exactly what your requirements are. Get in touch with Jerry Curtin Ltd for your next move.
- Location Hampshire | United Kingdom
- Member Since 2022
Scan & Share
View :
-
Heidelberg
GT
Hot Foil Stamping
We are pleased to offer: Heidelberg GT 3x18 Gold Foiling Platen Specification Max sheet size: 340 × 460 mm Min sheet size: 85 × 120 mm Usable foil area: 320 × 448 mm Max speed: 4,000 impressions/hour Temperature range: 0 – 200 ºC Foil roll length: 610 m Foil feed accuracy: ±0.1 mm Electrical: 220–240 V / 16 A Good working order Test possible
Ringwood
United Kingdom -
Zechini
X-Case
2016
Case Binding
We are pleased to offer: Used Zechini X-Case – Casing-In Machine Year 2016 Specification The Zechini X-Case is a casing-in machine designed for inserting book blocks into hard covers with precision and consistency. Renowned for its reliability and user-friendly operation, the X-Case combines robust mechanical construction with simple controls, delivering stable performance for medium-run bookbinding and publishing. This 2016 model can handle a wide range of formats, from small books to large volumes, with a maximum book thickness of 60 mm. With a production speed of up to 200 cycles per hour, it is an efficient solution for the production of hardcover books, yearbooks, photo books and premium catalogues. The identification plate states that the machine was supplied by Friedheim International, the official UK distributor of finishing equipment. Type: Casing-in machine (for hardcover bookbinding) Minimum book size: 70 × 70 mm Maximum book size: 460 × 500 mm Maximum book thickness: up to 60 mm Production speed: up to 200 cycles/hour Main functions: insertion of book block into hard cover, uniform pressing, gluing and spine adjustment Manufacturer: Zechini (Italy) Supplier: Friedheim International (UK) Good working order Available immediately
Ringwood
United Kingdom -
Kolbus
DA 36
1988
Case Binding
We are pleased to offer: Used Kolbus DA 36 Casemaker Year 1988 Specification The Kolbus DA 36 Casemaker is a fully automatic machine for producing hard covers and rigid cases, highly valued within the bookbinding industry. It is ideal for the manufacture of hardback book covers, luxury boxes, ring binders, and similar products. The DA 36 enables a continuous workflow thanks to its automatic board feeders, hot-melt glue system with pre-melter, cover material conveyors, and integrated mechanisms for inserting rigid spines. This model offers a well-balanced combination of format capacity, moderate mechanical speed, and versatility, making it suitable for small to medium-sized production workshops that require reliability and high-quality finishing. Maximum case size (open): 405 × 560 mm Minimum case size: 110 × 155 mm Spine insert width: 8 – 80 mm Mechanical speed: up to 36 cycles per minute (approx. 14–15 in practical use) Cover material feeder: Automatic Board feeder: Automatic, including hard spine insert feeding Soft spine insert: Roll feeding Adhesive system: Hot-melt glue with pre-melter Suitable materials: Paper, board and flexible cover materials Country of manufacture: Germany Good working order Available immediately
Ringwood
United Kingdom -
Horizon
VAC 100a
2009
Collating and inserting lines
We are pleased to offer: Used Horizon VAC 100a Collator with ST 20 Delivery Year 2009 Specification The Horizon VAC-100A Collator with ST-20 Delivery is a highly reliable and fully automatic collating system designed for professional print finishing environments. Renowned for its accuracy and flexibility, the VAC-100A uses a suction rotor feeding system that ensures smooth, mark-free handling of a wide range of paper stocks. With 10 bins per tower and the ability to expand up to 6 towers (60 stations), this model provides excellent scalability for medium to high-volume production. The attached ST-20 stacker unit efficiently receives collated sets and automatically offsets them laterally for easy separation. The stacker can unload completed sets directly onto a wheeled pallet, ensuring continuous operation with minimal manual intervention. This combination delivers outstanding productivity, consistency, and versatility—ideal for commercial printing, booklet production, and finishing operations. VAC-100 Series Number of Bin: 10 bins Sheet Feeding System: Suction Rotor Feeding System Expandability: Up to 6 towers (60 stations). Sheet Size: Max. 350(W) x 500(L) mm (13.77" x 19.68") / Min. 148(W) x 148(L) mm (5.83" x 5.83") Sheet Weight Range: 52 gsm to 208 gsm Bin Pile Height: Max. 55 mm (2.2") Sheet Overlap: 4 Steps Collating Interval: Automatic Setting and Variable Setting Production Speed: Max. 9,900 sets/hr. (A5LEF, Straight Receiving) / Max. 8,900 sets/hr. (A4LEF, Straight Receiving) Program Collation: Double Cycle / Dual Cover Feed / Preset Tabbing Stacker Unit (ST-20 Delivery) Type: Automatic offset stacker receiving tray Function: Laterally shifts each collated set to separate completed stacks Unloading System: Stack of collated sets can be unloaded directly onto a wheeled pallet Operation: Collating restarts automatically when the stacker returns to its home position Sheet Overlap: 4-step adjustment Collating Interval: Automatic and variable setting Production Speed: Up to 9,900 sets/hour (A5 LEF, straight receiving) / Up to 8,900 sets/hour (A4 LEF, straight receiving) Program Modes: Double cycle, dual cover feed, preset tabbing Good working order Available immediately
Ringwood
United Kingdom -
Hydromat
SL III M-900
1991
Three Knife Trimmer
We are pleased to offer: Used Hydromat SL III M-900 Semi-automatic three-knife trimmer Year 1991 Specification The Hydromat SL 111 M-900 is a semi-automatic three-knife trimmer designed for trimming the head, tail and fore-edge of books, magazines or stacked printed materials. This robust German-built machine offers accurate, hydraulic cutting performance with both single and continuous operation modes, suitable for one-operator use. It is equipped with an adjustable backgauge, hydraulic clamp and cutting drive, and precise guides for consistent trimming quality. The machine is ideal for short to medium-run book production, finishing lines or bindery workshops. Model / Type: Hydromat SL111 M-900 System: Semi-automatic 3-knife trimmer Max. trimming size (W × H): 460 × 350 mm Min. trimming size (W × H): 70 × 50 mm Max. book / pile height: up to 120 mm Clamp opening (approx.): 160 mm Production speed: up to 25 cycles/min (≈ 1,500 cycles/hour) Knife drive: Hydraulic Clamping system: Hydraulic Power requirement: approx. 7.5 kW, 3-phase Weight (approx.): 2,500 kg Dimensions (L × W × H): 2,200 × 1,600 × 2,000 mm Included: 1 spare set of knives Good working order Available immediately
Ringwood
United Kingdom -
Yotta
2513 G5 High Speed UV Flatbed Printer
2018
Sheet Fed / Offset
We are pleased to offer: Used YOTTA -2513 G5 High Speed UV Flatbed Printer Year 2018 Specification (approx.) The YOTTA -2513 G5 is a high-speed UV flatbed printer designed for direct-to-substrate printing on both rigid and flexible materials in large format. With a print area of 2,500 × 1,300 mm and equipped with Ricoh Gen5 printheads, this model delivers outstanding resolution with variable drop greyscale technology, ensuring excellent detail and consistent performance in production. Its UV LED curing system enables instant drying, vibrant colour reproduction, and reduced energy consumption. The multi-zone vacuum table secures substrates firmly in place, while compatibility with CMYK White Varnish inks allows for a wide range of creative finishes, including texture, relief effects, and gloss or matte coatings. With its speed, reliability, and versatility, the YD-2513 G5 is an ideal solution for companies in signage, display graphics, decoration, packaging, and industrial printing that demand consistent quality across short, medium, and long production runs. Printing Technology: UV LED direct-to-substrate flatbed printing Maximum Print Area: 2,500 × 1,300 mm Maximum Substrate Height: Up to 100 mm Printheads: Ricoh Gen5 with variable drop greyscale technology Print Resolution: Up to 1200 dpi Ink Colours: CMYK White Varnish (optional) Production Speed (approx.): Draft Mode: up to 40 m²/h, Standard Production: 20–25 m²/h, High Quality: 10–15 m²/h Curing System: UV LED lamps, energy-efficient and long-lasting Vacuum Table: Multi-zone vacuum system for substrate stabilisation Compatible Substrates: Acrylic, PVC, wood, glass, ceramics, metal, cardboard, rigid plastics, flexible plastics, vinyl, leather, and more RIP Software: Photoprint / Onyx (depending on configuration) Connectivity: USB / LAN Machine Dimensions (approx.): 4,100 × 2,050 × 1,260 mm Machine Weight (approx.): 1,200 kg Good working order Available immediately
1
Ringwood
United Kingdom -
Matica Technologies
S 6200 GE Card Issuance System
2017
Digital Press
We are pleased to offer: Used Matica Technologies S6200GE Card Issuance System Year 2017 Specification Printer specifications Print technology: Monochrome thermal transfer and colour dye-sublimation, direct-to-card / Embossing, indenting / Tipping (black, silver, gold, white, blue and varnish) Print resolution: 300 dpi Print area: Near edge-to-edge Speed: Up to 600 cph Embossing and indenting unit: Single 98 characters Printing: Single S1 high speed graphic printing unit with flip over and dual-side cleaning station Fonts: Standard Gothic and OCR7B emboss / OCRB1 and OCRB4 front indent/ OCRA1 and CVV2 rear indent/ Wide choice of country specific and other embossing/indent types Communications interface: USB 2.0, Ethernet Printer dimensions (LxWxH): 1930 to 3050 x 550 x 1400 mm (76 to 120’’ x 22’’ x 55’’) Power supply: 220-240V/100-120V, 50-60 Hz Operating environment: Temperature: 15ºC - 30ºC, 59ºF - 86ºF/ Humidity: 30% - 70% (non-condensing) Card specifications Input /output hopper capacity: 600 cards / 600 cards (Approx. 385 embossed cards) Reject hopper capacity: 30 cards Card types: ABS, PET, PVC Software Maticard Pro: Windows® (32/64bit) 7, 8.1, 10, 11, Server 2012, 2016, 2019, 2022. Diagnostic and setup software included Smart card SDK optional Encoding Magnetic stripe: Tracks 1, 2 & 3 ISO7811, HiCo/LoCo Contact / Contactless: EMV compliant contact chip encoding / EMV compliant contactless chip encoding. Consumables Printer ribbons: Black monochrome ribbon: up to 11,200 prints per roll (45 mm length per card) 5-panel YMCKO colour ribbon: 1,000 prints per roll 6-panel YMCKOK colour ribbon: 800 prints per roll Half-panel YMCKO colour ribbon (especially for photo): 1,400 prints per roll * Other monochrome ribbons available on request Tipping ribbon: Up to 4,000 prints per roll Colour tipping: Black, silver, gold, white, blue and varnish Rear infill ribbon (7 ch/card): Up to 4,500 prints per roll Front infill ribbon (35 ch/card): Up to 1,800 prints per roll Colour infill: black and white Good working order Available immediately Read More: https://www.jerrycurtin.com/machine/en-134421/matica-technologies-s-6200-ge-card-issuance-system
Ringwood
United Kingdom -
Horizon
VAC 100a
2001
Collating and inserting lines
We are pleased to offer: Used 3 X Horizon VAC-100-A-M-C TOWERS With ST-20 Stacker Year 2001 Specification -Air-Suction Collator VAC-100 Included: VAC-100A, VAC-100M, VAC-100C Module Configuration: VAC-100a / VAC-100m / VAC-100c Number of Bin: 10 bins Sheet Feeding System: Suction Rotor Feeding System Sheet Size Max. 350(W) x 500(L) mm (13.77" x 19.68") Min. 148(W) x 148(L) mm (5.83" x 5.83") Sheet Weight Range: 52 gsm to 208 gsm Bin Pile Height: Max. 55 mm (2.2") Sheet Overlap: 4 Steps Collating Interval: Automatic Setting and Variable Setting Production Speed: Max. 9900 sets/hr. Only when connected with the StitchLiner5500. Machine Weight: VAC-100a : 290 kg / VAC-100m: 290 kg / VAC-100c : 290 kg Voltage / Frequency: Single Phase 200 V, 50 / 60 Hz Single Phase 220 / 230 / 240 V, 50 Hz -ST-20 Stacker Delivery Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs. It can stack papers up to 320 mm high, which means fewer stops to empty it. Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order. Max. sheet size: 450 x 310 mm Min. sheet size: 185 x 128 mm Max. Pile Height: 320 mm Dimensions: 652 x 550 mm Weight: 62 kg Good working order Available immediately Read More: https://www.jerrycurtin.com/machine/en-134447/3-x-horizon-vac-100-a-m-c-towers-with-st-20-stacker
Ringwood
United Kingdom -
Brehmer
P 703
1997
Saddle Stitcher
We are pleased to offer: Used Brehmer P 703 –Stab and Saddle Wire Stitcher Year 1997 The Brehmer P703 is a heavy-duty industrial wire stitcher, purpose-built for stab and saddle stitching applications. Known for its robust construction, reliable performance and relatively quiet operation, it is ideal for both commercial printing houses and industrial binderies. This model is capable of processing book blocks up to 25 mm in thickness and is equipped with a tilting worktable for quick conversion between stab and saddle stitching. With adjustable side guides and convenient foot-pedal operation, it ensures accuracy, consistency and ease of use, while requiring minimal maintenance. Model: Brehmer P703 (703/1T – single-head Heavy Duty Stitcher) Sheet Size: 32 x 44 cm Stitching capacity: Up to 25 mm (depending on paper and wire quality) Operation modes: Flat or saddle stitching (tilting table) Operation: Foot pedal, adjustable guides, easy front access Voltag: 220V - 50 Hz Build: Heavy-duty industrial machine, designed for continuous operation Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134450/brehmer-p-703-stab-and-saddle-wire-stitcher
Ringwood
United Kingdom -
Diamond Tools
P 7 Litho Press
2007
Envelope production
We are pleased to offer: Used Diamond P7 Litho Press Year 2007 Specification Model: P7 - 18 In-House 1 & 2 Colour Litho Printing 3rd colour (if not in Register) with 2 x Dedicated Envelope Presses On-Site. Full Bleed, Tints, Duo Tone and Two Sided Washes (subject to sight of artwork). Ability to print sizes from 89 x 152mm to 457 x 324mm. With a capacity of printing up to 2 million envelopes per week. From Standard Envelopes to Gussets and board Back. Light Board, All Board & Tear Resistant. The Diamond P7 Press is a 2-colour Litho press designed primarily to print envelopes. It is widely acknowledged in our industry to be one of the most versatile and consistent printing machines available. The machine features On-The-Run Registration, a Swing-Away second Colour Unit, and a Quick Image Change Indexer. Pushers are incorporated into the design, enabling the printer to litho-print envelopes with a colour wash. All solutions and inks used are environmentally friendly, non-alcoholic, and non-oil-based. Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134452/diamond-p-7-litho-press
Ringwood
United Kingdom -
Duplo
Direct Mail 230 C
2011
Collating and inserting lines
We are pleased to offer: Used Duplo Collator DIRECT MAIL DM-230C Year 2011 Specification Only 1 Tower The DM-230C is a new generation leaflet collator using cutting edge technology, including independent removal tray units, and ATC (Auto Timing Control) to increase performance in the paper leading edge alignment for a better-quality collated set. Model/Type: DM Collator DM-230C Feed Station: 23 bins Weight: 474 kg Dimensions in operation: 1,383(W) × 765(D) × 1,983(H) mm / Stored: 1,110(W) × 765(D) × 1,983(H) mm Power Supply: AC 220-240 V 50/60 Hz Power Consumption: 1,400W 7A Paper Feeding Method: Slant stacking separation method (Paper can be added during operation.) Paper Feed Capacity: Approximately 900 sheets (257×364 mm, fine quality paper 55kg) Paper Size: Normal Paper Feed Bins 100×150 mm to 297×420 mm long edge feed / Cover Paper Bin 182×257 mm to 364×515 mm / Re-Collation Paper Feed Bin 100×175 mm to 297×420 mm long edge feed Paper Type (Thickness): Normal Paper Feed Bins Sheet, single-folded, letter-folded, accordion-folded or double-folded paper, booklet (up to 1.5 mm when there is no space between each sheet) Re-Collation Paper Feed Bin Sheet, single-folded, letter-folded, accordion-folded or double-folded paper, booklet (up to 2.5 mm when there is no space between each sheet) Collated set (including folded paper, 23 sheets, 257×364, 55 kg paper) Processing Speed: 70 to 150 sets/min (9-speed) This is for the collation mode only. In the re-collation mode, the speed decreases by approximately 10 %. Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134453/duplo-collator-direct-mail-230-c
Ringwood
United Kingdom -
Duplo
DC 645
2012
Post Press
We are pleased to offer: Used Duplo DC-645 DC-ST1 DC-F1 DC-SC1 Year 2012 Specification The Duplo DC-645 combined with the DC-ST1 Stacker, DC-F1 Folding Unit, and DC-SC1 Sheet Feeder offers a complete, high-performance finishing solution for digital colour printing. This configuration allows cutting, creasing, perforating, folding and stacking in one streamlined workflow, ensuring exceptional precision, speed, and repeatability for short runs and personalised work. Overview The Duplo DC-645 combined with the DC-ST1 Stacker, DC-F1 Folding Unit, and DC-SC1 Sheet Feeder offers a complete, high-performance finishing solution for digital colour printing. This configuration allows cutting, creasing, perforating, folding and stacking in one streamlined workflow, ensuring exceptional precision, speed, and repeatability for short runs and personalised work. Included Components • Duplo DC-645 high-performance cutter/creaser/perforator. • BCM-54 Business Card Module (54 mm). • PFM-01 Longitudinal Perforation Module. • DC-ST1 Stacker Unit. • DC-F1 Folding Unit. • DC-SC1 Sheet Feeder. • PC included. • Barcode job control. • Memory for up to 80 stored jobs. Key Specifications – DC-645 • Feeder: Suction/air with alignment. • Formats: Max. 650 × 370 mm / Min. 210 × 210 mm. • Paper weight: 110 – 350 gsm. • Knives: 6 longitudinal 1 cross knife. • Loading capacity: 100 mm. • Max. speed: 1,500 sheets/hr (A4) / 720 sheets/hr (A3). • Additional features: ultrasonic double-sheet detection, print mark reading, test run programme. • Power: 230 V / 0.3 kW. • Dimensions: 2,240 × 750 × 1,115 mm. • Weight: 360 kg. Key Specifications – DC-ST1 Stacker • Function: Receives and stacks finished sheets directly from the DC-645 or folding unit. • Capacity: High-capacity output stacking. • Integration: Compatible with DC-F1 for folded output. • Dimensions & weight: Available upon request. Key Specifications – DC-F1 • Speed: Up to 50 sheets/min (A4 with 1 fold). • Folding types: 0, 1, 2, or 3 folds. • Paper size: Max. 370 × 650 mm. • Paper weight: 110 – 350 gsm (max. 230 gsm for double gate fold). • Memory: 80 jobs. • Dimensions: 757 × 822 × 1,493 mm. • Weight: 95 kg. Key Specifications – DC-SC1 • Purpose: Intermediate feeding for multiple-up jobs from DC-645/615. • Paper size: Max. 370 × 650 mm. • Paper weight: 110 – 350 gsm. • Dimensions: 701 × 558 × 1,085 mm. • Weight: 65 kg. Total System Weight 520 kg (DC-645 DC-ST1 DC-F1 DC-SC1). Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134454/duplo-dc-645-dc-st1-dc-f1-dc-sc1
Ringwood
United Kingdom -
Redefining Customer Acquisition in Machinery and Equipment Sales
Plans, Pricing & Subscriptions
-
Duplo
PFi Bind 2100 PUR
2020
Perfect binder lines
We are pleased to offer: Used Duplo PFi BIND 2100 PUR Year 2020 Specification The PFi BIND 2100 PUR will help commercial printers and in-plants to bring in-house the highly profitable short run, on-demand jobs. The 2100 is ridiculously simple to use and is designed to deskill the PUR binding process. It takes automation to a new level; each book is automatically measured and the amount of glue on each book block is intelligently applied on the fly. The Patented Orbital PUR System makes the cleaning and maintenance process almost redundant which results in huge savings of expensive PUR glue, wax and man-hours. This means that warm up time for the 2100 PUR is only 20 minutes and cleaning time is only 5 minutes at the end of the day or shift. Self-sealing nozzle Closed tank Colour touch screen EasyLOAD cartridge Spine preparation tool Min. Book Size: 80 x80 mm Spine length: 80 x 330 mm Cover dimensions: Min. 80 x 160 mm / Max. 340 x 900 mm Cover thickness: 80 gsm-300 gsm Spine thickness: 1mm – 40 mm Cycling speed: 290 Glue application: Spine- PUR, Side- PUR Power supply: Single phase 230 V 50 Hz, 12A Dimensions of the machine (L x W x H): 1442 mm x 750 mm x 1260 mm Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134455/duplo-pfi-bind-2100-pur
Ringwood
United Kingdom -
Heidelberg
Stahlfolder K 66 4KTL
2008
Folding Machine
We are pleased to offer: Used Heidelberg Stahlfolder K66 4KTL year 2008 Specification Used Heidelberg Stahlfolder K66 – Automated Folder with 5th Knife and Stacker SN FH FNH0 00687 Year: 2008 Model: Stahlfolder K66 (4 KTL configuration) Folding Type: Automated buckle folder No. of Buckle Plates: 4 Additional Features: 5th knife unit Delivery stacker Format Width: up to 66 cm (26") Automation: Full automated set-up for quick changeovers Applications: Versatile folding for brochures, catalogues, signatures and commercial print jobs Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134459/heidelberg-stahlfolder-k-66-4ktl
Ringwood
United Kingdom -
Horizon
AFC 566 AKT
2012
Folding Machine
We are pleased to offer: Used Horizon AFC 566 AKT Year 2012 Specification High-performance, space-efficient automated cross-knife folding machines - The Horizon AFC-56 series features advanced automation, user-friendliness, and high-quality folding. – Set up a wide variety of fold patterns by simply touching the corresponding icon and inputting the sheet size on the large LCD colour touchscreen. 17 fold patterns are set on AFC-566AKT. – Automated setups take just a few seconds. The LCD touchscreen prompts the operator through all remaining settings for fast, efficient production. All adjustments are user-friendly and require minimal skill or training. – Fold rollers are constructed with a combination of steel and soft polyurethane for superior grip and sharp, consistent folding. – Horizon's advanced rotary suction feed system delivers fast, consistent feeding on a wide range of paper stocks. Machine Structure: 6KTT (6 Buckles Fold Knife, 2 Buckles Below Knife) Sheet Size Max. (Width x Length): 558 x 850 mm or 21.965” x 33.460” (Length 1,100 mm or 43.310” with optional extension table) Sheet Size Min. (Width x Length): 128 x 148 mm or 5.040” x 5.830” (Register guide minimum set position: width 74 mm or 3.0”) Sheet Weight Range: 35 to 220 gsm Belt Speed: 30 to 230 meters (99 to 754 feet) per minute Knife Fold 180 meters (590 feet) per minute Production Speed: Suction Head 42,000 cycles per hour, Knife 21,000 cycles per hour. Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134463/horizon-afc-566-akt
Ringwood
United Kingdom -
Horizon
AFC 746 F Cross Folder
2015
Folding Machine
We are pleased to offer: Used Horizon AFC 746F Cross Folder Year 2015 Specification BI Folder Registration Mark Input Screen Power Stop System Automatic Perforation Shaft Extraction Ejecting Function Presser stacker Machine Configuration: 6KTTL (6 Buckles 1st Fold Knife 2 Buckles below Knife 2nd Fold Knife) Sheet Size (Width x Length): Flat Pile Feeder: Max. 738 x 1,100 mm or 29.055” x 43.310” / Min. 210 x 210 mm or 8.270” x 8.270” Pallet Pile Feeder: Max. 738 x 1,100 mm or 29.055” x 43.310” / Min. 210 x 297 mm or 8.270” x 11.695” Round Pile Feeder: Max. 738 x 1,300 mm or 29.055” x 51.181” / Min. 210 x 148 mm or 8.270” x 5.827” Sheet Weight Range: Normal Paper 35 to 209 gsm, Art/Coated Paper 50 to 232 gsm Buckle Fold Length: 1st Buckle 1st Buckle 60 to 560 mm or 2.4” to 22.0” (Auto) 2nd Buckle 30 to 515 mm or 1.2” to 20.2” (Auto) 3rd Buckle 30 to 480 mm or 1.2” to 18.8” (Auto) 4th Buckle 30 to 480 mm or 1.2” to 18.8” (Auto) 5th Buckle 30 to 480 mm or 1.2” to 18.8” (Auto) 6th Buckle 30 to 330 mm or 1.2” to 12.9” (Auto) Belt Speed: 30 to 240 meters per minute or 99 to 787 feet per minute, Knife Fold 240 meters per minute or 787 feet per minute Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134464/horizon-afc-746-f-cross-folder
Ringwood
United Kingdom -
Horizon
BQ 270
2009
Perfect binder lines
We are pleased to offer: Used Horizon BQ-270 Perfect Binder Year 2009 Specification The BQ-270 is the first single-clamp binder to automatically set-up for cover scoring. Book titles are accurately positioned on the spine, and "hinge scoring" preserves the integrity of the spine LCD Touch - Screen Automatic cover feeder Hotmelt gluing Milling station Under 1 million copies Number of Clamper: 1 Book Size (Spine x Fore-edge): Max. 320 x 320 mm / Min. 135 x 105 mm Book Thickness: 1 to 50 mm (0.04" to 2") Cover Size (Top-Bottom x Fore-edge): Max. 320 x 660 mm / Min. 135 x 230 mm Cover Weight Range: 82 gsm to 302 gsm Cover Pile Height: Max. 70 mm (2.7") Warm Up Time: 40 min. Glue Temperature: 120 to 180 C Max. Milling Depth: 3 mm (0.12") Production Speed: Max. 500 cycle/hr. Voltage / Frequency: 3-Phase 200 V 50/60 Hz, 3-Phase 220 V 50/60 Hz, 3-Phase 400 V 50/60 Hz Machine Dimensions: 2,300(W) x 860(D) x 1,250(H) mm (90.6" x 33.9" x 49.2") Machine Weight: 900 kg (1,984.5 lb) Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134465/horizon-bq-270-perfect-binder
Ringwood
United Kingdom -
Horizon
MC-80a
2003
Collator and booklet production
We are pleased to offer: Used Horizon MC-80a MC-80m (Collating Towers) FC-20 (Fore-edge Trimmer) SPF-20 (Stitcher & Folder) Booklet Maker Year 2003 Specification Multi – Modular Air – Suction Collator MC-80a (Main Module) MC-80m (Extension Module) Number of Bins: 8 Sheet Size: 148 x 210 mm to 318 x 470 mm (5.8” x 8.3” to 12.5” x 18.5”) Bin Pile Height: 50 mm (2”) Stock Weight: 52 gsm to 260 gsm Collating Speed (A4): 3,500 Sets/Hr Error Detection: Miss, Double, and Jam Detection system (Photocell) Error Monitor: Two sets of Feed Error Monitors Power: 200 V 50/60Hz,220 V 60 Hz, 400 V 50 Hz Power Consumption: 200 V MC 80a 1,900 W, 400 V MC 80a 1,800 W / 200 V MC 80m 200 W, 400 V 200 W Machine Weight: MC 80a 229kg (505 lb) / MC 80m 223kg (492 lb) SPF-20 Stitcher & Folder Sheet Size: Max. 350(W) x 500(L) mm (13.7" x 19.6") Min. 120(W) x 180(L) mm (4.8" x 7.1") Finish Size: Max. 250(W) x 350(L) mm (9.8" x 13.7") Min. 90(W) x 120(L) mm (3.6" x 4.8") Stitching Thickness: Max. 4 mm (0.15") (only for side stitch) Stitching & Folding Thickness: Max. 2 mm (0.07") 20 sheets of 60 gsm Stitch Distance: 73 to 160 mm (2.9" to 6.2") Adjustable Stitching Wire: Standard: No. 25 (0.5 mm) (0.020") Option: No. 28 (0.4 mm) (0.016") Production Speed: Max. 3,660 booklets/hr. (A4-Finish) Max. 4,050 booklets/hr. (A5-Finish) Voltage / Frequency: Single Phase 200 V, 50 / 60 Hz Single Phase 220 V, 60 Hz Single Phase 230 V, 50 / 60 Hz Rated Current: Single Phase 200 V, 50 / 60 Hz, 3.7 / 2.9 A Single Phase 220 V, 60 Hz, 3.4 A Single Phase 230 V, 50 / 60 Hz, 2.2 / 2.0 A Power Consumption: Single Phase 200 V, 50 / 60 Hz, 460 / 400 W Single Phase 220 V, 60 Hz, 600 W Single Phase 230 V, 50 / 60 Hz, 520 / 500 W Heat Output: 620 kJ (150 kcal) Motors: 200 W x 1, 100 W x 1, 60 W x 1, 15 W x 1 Machine Weight: 1, 100 W x 1, 60 W x 1, 15 W x 1 470 kg (1,036.4 lbs.) FC-20 Fore-edge Trimmer Book Size (Before Trim): Max. 250(W) x 350(L) mm (9.8" x 13.7") Min. 90(W) x 120(L) mm (3.6" x 4.8") Finish Size: Max. 250(W) x 350(L) mm (9.8" x 13.7") Min. 85(W) x 120(L) mm (3.4" x 4.8") Trimming Length: Max. 20 mm (0.78") Trimming Thickness: Max. 4 mm (0.15") 50 sheets of 60 gsm Production Speed: 3,660 booklets/hr. (A4-Finish) 4,050 booklets/hr. (A5-Finish) Voltage / Frequency: Single Phase 200 V, 50 / 60 Hz Single Phase 220 V, 50 / 60 Hz Single Phase 230 V, 50 / 50 Hz Rated Current: Single Phase 200 V, 50 / 60 Hz, 1.5 / 1.6 A Single Phase 220 V, 50 / 60 Hz, 1.4 / 1.0 A Single Phase 230 V, 50 / 60 Hz, 1.3 / 1.4 A Power Consumption: Single Phase 200 V, 50 / 60 Hz, 290 W Single Phase 220 V, 50 / 60 Hz, 280 / 220 W Single Phase 230 V, 50 / 60 Hz, 270 / 300 W Motors: 400 W x 1, 60 W x 1, 25 W x 1 Machine Weight: 230 kg (507.2 lbs.) Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134466/horizon-mc-80-a,-mc-80-m,-spf-20,-fc-20-booklet-maker
Ringwood
United Kingdom -
Horizon
StitchLiner System
2006
Saddle Stitcher
We are pleased to offer: Used Horizon StitchLiner System Year 2006 Specification Horizon StitchLiner line for saddle-stitched booklets, configured for continuous production with tower collating, accumulation and folding, saddle stitching, and in-line three-knife trimming. The VAC-100 towers ensure stable, expandable vacuum-fed sheet feeding; the ACF-30 accumulator/folder assembles the set with controlled creasing and folding; the SPF-30 stitcher/folder performs precise saddle stitching; the HTS-30 trimmer executes the final three-knife cut; and the ST-40 stacker/by-pass unit allows high pile stacking, rejection of faulty sets, and continuous operation. The belt delivery and waste extraction system optimise workflow and cleanliness throughout the line. An ideal system for commercial printers and publishers requiring precision, repeatability, and high productivity in brochures, magazines, and catalogues. Includes: 2× VAC-100 Collating Towers (VAC-100a & VAC-100m, 10 bins each, suction feed) ST-40 Stack/By-pass Unit ACF-30 Accumulator/Folder SPF-30 Saddle-Stitcher/Folder HTS-30 3-Knife Trimmer (in-line) Belt delivery system Waste extraction for trimmer Maximum speed: Up to 9,700 sets/hour (job dependent) Sheet size range: Approx. 148 × 148 mm to 350 × 500 mm Maximum book thickness: Approx. 51 mm (trimmer) Condition: Fully operational, well-maintained, in production Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134471/horizon-stitchliner-system
Ringwood
United Kingdom -
Interlake
S 3 A 7/8 inch
Stitching and folding
We are pleased to offer: Used Interlake S3A 7/8 inch Specification The Interlake S3A 7/8″ is a heavy-duty wire stitcher designed for bookbinding, commercial printing, and finishing applications that require strength and precision. With a stitching capacity of up to 7/8″ in thickness, this model is widely used for assembling catalogues, booklets, and multi-page documents. Built for durability and continuous operation, the S3A provides consistent results and is considered a reliable workhorse in the finishing industry. Heaven duty stitcher Capacity: 2 Sheets up to 7/8" Standard Width of Stitch: 7/16" Stitches per Minute: 191 Max. Book Thickness: Up to approx. 1 1/8″ on extended model Electrical: 115 Volts / 60 Hz / 1 PH / 1/2 H.P Machine Dimensions (L × W × H): Approx. 31.5″ × 23.5″ × 53.5″ (800 × 600 × 1360 mm) Approx. Weight: 282 lbs (≈ 128 kg) Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134472/interlake-s-3-a-7/8-inch
Ringwood
United Kingdom -
James Burn/Lhermite
Beta Doc WB 38
2003
Post Press
We are pleased to offer: Used James Burn Beta-Doc WB38 Year 2003 Specification WIRE BINDING MACHINE With this James Burn Beta-Doc WB38 wire binding machine, you can close all wire diameters in 2:1 and 3:1 pitch, from 1/4 inch to 1 inch. Changing the diameters is quick and simple using different size channels (all included in the price). The machine has a simple-to-use LCD keypad to select wire size, number of loops, etc. Compatible with all wire spools on the market. The Beta-Doc is ideal for printers looking to get into wire binding without outlaying a huge amount on a new machine. Tooling List: TOOLING 3-1 THUMB CUT 3-1 SQUARE HOLE 2-1 ROUND HOLE 2-1 SQUARE HOLE 6 MM COIL BIND PUNCH Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134474/james-burn-beta-doc-wb-38
Ringwood
United Kingdom -
James Burn/Lhermite
K 50 Punch
1993
Post Press
We are pleased to offer: Used James Burn K50 Punch Year 1993 Specification The James Burn K50 Punch is a robust and reliable punching machine specifically designed for wire binding applications. Renowned for its precision and versatility, the K50 is equipped with multiple punching tools, making it ideal for commercial print finishing environments. With a working width of up to 500 mm, it can handle a wide range of binding formats efficiently. Its solid construction ensures durability and consistent performance, while the quick-change tooling system increases productivity. Model: K50 Punch Application: Wire binding punch Punching Tools: 2.1 mm round, 3.1 mm round, and square hole tools Maximum Working Width: 500 mm Operation: Heavy-duty punching for binding formats Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134475/james-burn-k-50-punch
Ringwood
United Kingdom -
Kirk-Rudy
497 A Plastic Card Attachment System
2005
Mailing machines
We are pleased to offer: Used Kirk-Rudy 497A Year 2005 Specification Plastic Card Attachment System Save time and money with Kirk-Rudy’s all-new KR 497 Servo Attaching System. Attach small plastic cards as well as product up to 8.5” x 11” quickly and accurately to a wide variety of product. The KR 497’s high-vacuum transport table is ready to run in line with another machine or KR feed system. Vacuum belts carry product smoothly beneath the hot melt applicator and KR 497 Servo-Feeder. Base length and width options make it easy to create an attaching system matching your requirements. Designed to be flexible, the KR 497 applicator handles a wide variety of products and jobs. Run plastic cards, magnets as well as a variety of folded paper products and apply up to three pieces onto a single carrier. If needed, the standalone feeder is easily mounted onto another product transport or web press. Vacuum belt system Variable speed DC motor Attaching Feeder: Servo drive Run multiple cards onto a single piece Easily placed on other machines Height and Position control knobs Pivots upward and away for jam clearance Extended hopper guides Production Rate: Maximum base speed - 400 ft/min Material Handling: Base: Stock size (W x L): Min. 7.62 x 12.7 cm or 3”x 5”, Max. 43.18 x 35.56 cm or 17” x 14” Stock thickness Min. Single sheet, Max. 15.748 mm or 0.62” Attaching Feeder: Stock size (W x L): Min. 5.38 x 5.38 cm or 2.12” x 2.12”, Max. 27.94 x 21.59 cm or 11” x 8.5” Stock thickness Min. Single sheet, Max. 1.52 mm or 0.06” Length: 182.88 cm or 72” Height: 152.4 cm or 60” Width: 114.3 cm or 45” not including hot melt Electrical Requirements: Base: 120 VAC, 15 amp, 1 Ø Attaching Head: 220 VAC, 10 amp, 1 Ø Hot Melt Glue: 120 VAC, 20 amp, 1 Ø (220 VAC, 10 amp, 1 Ø) Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134476/kirk-rudy-497-a-plastic-card-attachment-system
Ringwood
United Kingdom -
Kolbus
DA 36
1988
Case Binding
We are pleased to offer: Used Kolbus DA 36 Casemaker Year 1988 Specification The Kolbus DA 36 Casemaker is a fully automatic machine for producing hard covers and rigid cases, highly valued within the bookbinding industry. It is ideal for the manufacture of hardback book covers, luxury boxes, ring binders, and similar products. The DA 36 enables a continuous workflow thanks to its automatic board feeders, hot-melt glue system with pre-melter, cover material conveyors, and integrated mechanisms for inserting rigid spines. This model offers a well-balanced combination of format capacity, moderate mechanical speed, and versatility, making it suitable for small to medium-sized production workshops that require reliability and high-quality finishing. Maximum case size (open): 405 × 560 mm Minimum case size: 110 × 155 mm Spine insert width: 8 – 80 mm Mechanical speed: up to 36 cycles per minute (approx. 14–15 in practical use) Cover material feeder: Automatic Board feeder: Automatic, including hard spine insert feeding Soft spine insert: Roll feeding Adhesive system: Hot-melt glue with pre-melter Suitable materials: Paper, board and flexible cover materials Country of manufacture: Germany Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134492/kolbus-da-36-casemaker
Ringwood
United Kingdom -
Kolbus
DA 557 Casemaker
1978
Case Binding
We are pleased to offer: Used Kolbus DA 36 Casemaker Year 1988 Specification The Kolbus DA557 is a reliable and robust casemaker designed for the high-quality production of book cases, folders, and other hard covers. Built with the renowned German engineering standards of Kolbus, this machine ensures durability, accuracy, and consistent output. Despite its year of manufacture (1978), this unit remains in production and operational, offering an efficient solution for medium to large-scale case production. Machine type: Automatic casemaker for hard covers Max. cover size: Approx. 670 × 390 mm Min. cover size: Approx. 120 × 180 mm Board thickness: 1.0 – 3.5 mm (depending on material) Cover turn-in (overlap): Adjustable, approx. 15 – 30 mm Covering materials: Paper, cloth, synthetic materials Production capacity: Up to 30 cycles/min (depending on format and material) Processes: Board feeding, gluing, board positioning, cover feeding, cover gluing, turn-in folding, and final pressing Construction: Heavy-duty steel frame for long-lasting precision Status: In production Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134507/kolbus-da-557-casemaker
Ringwood
United Kingdom -
Magnum
MCC 35 ASP
2019
Automatic Creasing Machine
We are pleased to offer: Used MAGNUM MCC-35ASP Year 2019 Specification Automatic Business Card Cutter Easily exchangeable slide-in crease/perforate tools Create up to 32 cuts, creases and perforations in one pass High-speed job changeover with 64 preset programs Top vacuum feeding with central registration Ultrasonic double-feed detector High-volume waste bin Strike perf capabilities for “box” or “T” perforation Barcode reader allows multiple jobs to be stacked for auto-feeding Ideal for creasing menus, book covers, leaflets, business cards and invitations. Infeed: Automatic Infeed Paper Spec(W*L): Max. 330mm× 650mm, Min. 210mm× 210mm Output Size(W*L): Max. 330mm× 650mm/ Min. 50mm× 48mm Paper Weight: 150-350gsm Paper Type: Chrome, Laminated, UV Coated, etc Cross Cutter: First Cut: 3.2-15mm, Last Cut: 5-15mm, Gutter Cut: 3-15mm, Min Card Size for Cutter: 48mm, Max. quality for Cutter per Sheet: 32, Accuracy for Cutting: ± 0.2-0.4mm Slit: Slitters: 6, Side Trim: 3.2-38mm, Gutter Slit: 0 or 5-15mm, Accuracy for Slitting: ± 0.3mm Max. quality for Crease per Sheet: 32 Crease Depth Adjustment: 8 Level Auto Adjust Crease Direction: Both Crease Die Spec: 1.0mm Accuracy for Creasing: ± 0.3mm Feeding Type: Top Vacuum Speed (A4 trimming 4 sides, crease in the middle): 20Sheets/min Pile Loading: 100mm Double Feed Detect: Ultrasonic Detecting User Template Storage: 64 Colour touchscreen display and control: 230 mm Dimensions Length*Width*Height: 1960 X 700 X 1200 mm Power Source: AC110V-240V,50/60Hz Power: 800W Weight: 150kg Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134478/magnum-mcc-35-asp
Ringwood
United Kingdom -
MBO
K 800-4 K
2008
Folding Machine
We are pleased to offer: Used MBO K800 Year 2008 Specification The MBO K800 from 2008 is a high-capacity automatic folding machine designed for demanding bindery and finishing work. Equipped with the FP-120 pallet feeder (featuring Vaculift suction and Vacubelt conveyor), it ensures smooth and continuous sheet feeding, even with tall piles. This model offers multi-fold capability of up to 32 pages, outstanding flexibility through modular configurations, and delivery via the SBAP-72 ME stacker, which provides neatly pressed stacks. The Navigator control system enables automatic adjustment of key components (buckle plates, rollers, deflectors), allowing for quick and precise format changes. With its robust design, sound-proof covers, and VIVAS alignment system, this folder is a professional solution for the production of folded booklets, brochures, and publications. Feeder: FP-120 pallet feeder with Vaculift suction and Vacubelt conveyor Control system: MBO Navigator (automatic format setting) Delivery system: SBAP-72 ME stacker with integrated pressing unit Folding capacity: Up to 32 pages per signature/booklet Sheet size range: Minimum: approx. 150 × 210 mm / Maximum: approx. 780 × 1200 mm Typical folding configuration: 4 buckle plates 2 knives 1 buckle plate after the first knife Additional features: VIVAS suction belt alignment system Creasing shafts before the first buckle plate unit Option for left- or right-hand delivery through section rotation Vacuum pump with sound-proof hood Delivery detail: Signature capacity: Typically, 16 to 24 pages (depending on design and stock) Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134508/mbo-k-800-4-k
Ringwood
United Kingdom -
MBO
T 460-4-4 K
2005
Folding Machine
We are pleased to offer: Used MBO T-460 Folder Year 2005 Specification T460-1-46/4-P & T460-2-46/4 Z6 Knife Folding unit MS Control Vacuum Feeder Noise hoods Tools manuals Number of buckle plates: Folding unit I: 4 buckle plates Folding unit II: 4 buckle plates Max. Paper Size: 460 (W) x 660 (L) mm Min. Paper Size: 100.5 (W) x 100.5 (L) mm Paper Weight: 30 – 180 gsm Min. Fold: 32 mm Electrics 400 V, 3 Ph, 50 Hz, 6 A. Excellent condition Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134479/mbo-t-460-4-4-k
Ringwood
United Kingdom -
Morgana
BM 2000 S
2019
Booklet machines
We are pleased to offer: Used Morgana Booklet Maker BM 2000S Year 2019 Specification Air assist feeder unit Large LCD programmable display Up to 4000 sets per hour in collate mode Feed pre-collated sets from digital devices High quality ISP stitching head 30 x 80gsm sheets, booklets up to 120 pages Up to 1800 sets/ per hour High quality front edge trimmer unit Includes: BM 2000S Booklet Maker AF602 Feeder FTR 2000 Trimmer SQF 2000 Squarefolder unit for flat spine booklets BM 2000S Booklet Maker Capacity: 1-25 sheets of 80gsm Speed: Up to 1800 sets/hour Sheet Size Max: 320 x 470mm / Min: 120 x 210mm Paper Weight Max: 300gsm / Min: 60gsm Stapling modes: Saddle, edge and corner stapling Stitching heads: 2 Job saving: Yes, 10 jobs Dimensions: incl. base and belt stacker, 1135(H) x 1520 (W) x 680 (D) mm Weight: 161kg AF602 Feeder Number of Sheets: 2 x 270mm / 2700 sheets (80 gsm / 20 lb. bond) Maximum Sheet (Width X Length): 350mm / 13.77"- 660mm / 25.98" Minimum Sheet (Width X Length): 120mm / 4.72"- 210mm / 8.2" Paper Weight: Max. 300gsm (76lb bond) / Min. 60gsm (14lb bond) Productivity/Speed: Feeding Speed (Note: Speed is limited by booklet maker) Up to 15,000 Sheets/Hour FTR 2000 Trimmer Capacity: 30 sheets of 80 gsm (20lb. bond) Booklet length: Max. trimming 220mm/ Min. trimming 120mm Booklet length: Max. by pass 235mm /Min. by pass 105mm Booklet width: Max. 320mm / Min. 120mm Speed: Up to 1800 sets/hour Trim length: Up to 15mm Dimensions: incl. base, 1100(H) x 350(W) x 595 (D) mm Weight: 83kg SQF 2000 Squarefolder Capacity: 30 sheets of 80gsm Booklet (width x length): Max. 320mm -228mm /Min. 120mm- 105mm Speed: Up to 1800 sets/hour Dimensions: Incl. base, 1100(H) x 350(W) x 595(D) mm Weight: 60kg Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134480/morgana-bm-2000-s-booklet-maker
Ringwood
United Kingdom -
Morgana
DigiCreaser – (Model 770820)
2012
Manual Creasing Machine
We are pleased to offer: Used Morgana DigiCreaser – (Digital Creasing Machine Model 770820) Year 2012 Specification The Morgana DigiCreaser is a semi-automatic digital creasing machine, specifically designed to eliminate cracking of toner or ink on digitally or offset printed sheets. With manual feed and motorised operation, it ensures precise and repeatable creases, even on heavy stock and laminated covers. The DigiCreaser 770820 (2012) allows for up to 9 creases per sheet, fully programmable, with job memory storage for repeat work and reduced set-up times. It is the perfect solution for producing covers, book jackets, cards, brochures, leaflets and any printed material requiring a professional crease without fibre breakage. Type: Semi-automatic digital creasing machine Feed system: Manual assisted, with adjustable side lays Maximum sheet: length: 630 mm / width: 320 mm Minimum sheet width: 140 mm Paper weight: up to 350 gsm (digital and offset stock) Number of creases per sheet: up to 9 (programmable) Job memory capacity: up to 9 stored programmes Production speed: up to 4,000 sheets/hour (depending on format and number of creases) Additional functions: optional perforation capability Dimensions (L × W × H): approx. 1,250 × 680 × 1,200 mm Weight: approx. 100 kg Power supply: 230 V, 50 Hz Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134510/morgana-digicreaser-%E2%80%93-(model-770820)
Ringwood
United Kingdom -
Palamides
BA 700 Bundle Delivery with Pressing Station
2002
Stacker
We are pleased to offer: Used Palamides BA-700 Bundle Delivery with Pressing Station Year 2002 Specification Includes: Bundle Delivery Jogging Station Pressing Station Delivery Table This professional and full automated universal delivery is used for processing folded brochures, especially signatures. The products are collected, pressed and bundled by the machine, stacked and the neatly jogged stacks are delivered to a parcel lift. The operator removes the ergonomically convenient jogged stack from the lift and no longer has to knock-up the products. This means that, even after several hours of production, the folding machine can still run at full production without stops or without tiring the operator. Floor model and easy operating with controls on the LED operating panel on the machine, simple connection to folders and gathering saddle stitching equipment automatic settings for all functions, counters, programs, adjustable pressing, parcel lift. Max. size: 700 x 330 mm (folded end-product, signature) Min. size: 145 x 95 mm (folded end-product, signature) Pressure: 2.000 kgs Speed: 40 - 200 m/min. Made in Germany Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134481/palamides-ba-700-bundle-delivery-with-pressing-station
Ringwood
United Kingdom -
Rilecart
B 596
1993
Case Binding
We are pleased to offer: Rilecart B- 596 Automatic Double Wirobinding Machine Year 1993 Specification The Rilecart B‑596 is a fully automatic double-loop wire binding machine, specifically designed for the efficient production of calendars, catalogues, and similar bound products. Manufactured in 1993, this robust and reliable unit is capable of handling both short and long runs with consistent precision and speed. It features a belt delivery system and is supplied with 2.1 mm and 3.1 mm punching tools. The B‑596 supports various wire pitches (2:1", 3:1", and 4:1") and includes a hanger binding station with an automatic feeder for enhanced productivity. The centralised automatic lubrication system ensures smooth operation and reduced maintenance. This machine remains in very good working condition and is well-suited to industrial bookbinding environments seeking a dependable wirebinding solution. Max. binding size: 500 × 350 mm Min. binding size: 60 × 80 mm Binding thickness: 1.5 mm to 17.5 mm Pitch options: 2:1″, 3:1″, 4:1″ Speed: 500 to 2,300 cycles/hour Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134513/rilecart-b-596-automatic-double-wirebinding
Ringwood
United Kingdom -
Smyth
Book Sewer-Manual Feed
1970
Sewing Machines
We are pleased to offer: Used Smyth Europea Book Sewer-Manual Feed Year 1970 Specification This manual-feed Smyth Europea Book Sewing Machine is a semi-automatic thread sewing system, ideal for the production of high-quality, sewn book blocks in short or medium runs. The operator manually opens each signature at the fold and places it onto the fixed transport saddle. The section is then taken by pushers and transferred to the sewing saddle, where an automatic registering device aligns the signatures before sewing. Thanks to its precise mechanical construction, the machine ensures tight, consistent stitching. Both sewing and hook needles are easy to align with the pre-punched holes, guaranteeing high accuracy and durability. It includes an automatic thread cut-off system, and when a signature is not loaded, the machine performs a blind stitch automatically. Cycles per minute: Approximately 100 cpm Max. paper size: 380 × 280 mm Min. paper size: 80 × 100 mm Output capacity: up to 6 000 cycles/hour Dimensions (L×W×H): 2.6 × 1.5 × 1.5 m Weight: approx. 1200 kg Power consumption: 3.1 kW Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134927/smyth-book-sewer-manual-feed
Ringwood
United Kingdom -
Sulby Bindmaster
Type STD
1979
Lining machines
We are pleased to offer: Used Sulby Bindmaster STD Year 1979 Specification Manufacturer: Sulby Model: Bindmaster (STD) Type of machine: Backing and lining machine (not a perfect binder) Main function: Lining sewn book blocks with Kraft paper or gauze, for padding, rounding, and backing prior to casing-in. Max. Book Size: 405 × 305 × 75 mm Min. Book Size: 125 x 75 x 3 mm Output: Up to 3,600 books/hr Glue system: PVA cold glue tank with glue rollers. Units included: Kraft paper/gauze lining unit, cold glue tank and glue rollers, roller pressing unit, side nipping unit, gauging unit, cut-off knife. Applications: Reinforcing sewn book blocks for case binding, Pad-making. Construction: Heavy-duty, free-standing mechanical design. Operation: Semi-automatic feeding and lining, suitable for medium to large-scale production. Mains Supply Current: 1 PH. Volts: 240 / 3 PH. Volts 400 - 440 / Cycles 50. Total HP. 7-525 / Heat-Volts: 240 / Heat-Watts: 200. Made in England Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134514/sulby-bindmaster-type-std
Ringwood
United Kingdom -
Vickers
Armstrongs Heavy Duty Wire Stitcher
1975
Stitching and folding
We are pleased to offer: Used Vickers Armstrongs Heavy Duty Wire Stitcher Year 1975 Specification The Vickers Heavy Duty Paper Stitcher is a reliable and robust solution for high-volume stitching needs in industrial and commercial settings. Built for durability, this used machine effectively handles thick stacks of paper, making it ideal for bookbinding, brochures, and similar projects. Designed with simplicity and efficiency in mind, it ensures smooth operation with minimal maintenance requirements. Vickers stitchers are renowned for their long-lasting performance and consistent stitch quality. This heavy-duty unit is an excellent choice for operations requiring reliable, high-quality stitching over extended periods. The machine's straightforward mechanics offer ease of use, facilitating quick setup and adjustment for different project demands. This Vickers stitcher represents a cost-effective addition to any bindery or print operation, combining strength, reliability, and ease of handling. Its proven performance history assures users of a dependable tool that meets professional standards. Saddle stitching or stab stitching up to 2 inches. Single head stitcher Flat & saddle stitching Three phase power supply Max. stabbing: 30 mm Max. saddle: 7mm Adjustable table height / back stop Good working order Available immediately Read more: https://www.jerrycurtin.com/machine/en-134494/vickers-armstrongs-heavy-duty-wire-stitcher
Ringwood
United Kingdom -
Wohlenberg
137
1988
Guillotines
We are pleased to offer: Wohlenberg 137 Guillotine Cutter – 54″ Cutting Width (1988) This robust and dependable Wohlenberg 137 guillotine cutter, manufactured in 1988, offers a generous 1370 mm (54-inch) cutting capacity—ideal for commercial print finishers handling larger formats. With its solid build and automation-friendly design, it’s tailor-made for efficiently processing large stacks with precision. Key Highlights: • Wide Cutting Format: Handles media up to 137 cm (54 inches)—great for oversized, high-volume jobs. • High Productivity: Capable of up to 42 cuts per minute, ensuring smooth and efficient workflow even under high-demand conditions. • Ample Pile Capacity: Supports pile heights of up to 165 mm, minimising loading times and allowing lengthy unattended runs. • Robust Construction: Weighs approximately 3.7 tonnes, providing stability and consistent, clean cuts throughout operations. Why it’s a smart addition to your finishing operations: Crafted for enduring performance, the Wohlenberg 137 combines wide-format capabilities with precise, repeatable cutting—perfect for bookbinding, large-format prints, packaging, and more. Its hefty frame and high-capacity load options mean fewer interruptions, while optional automation features offer a modern, streamlined user experience. Condition & Availability: • Year: 1988 • Condition: Good (serviced, operational, and ready for production) • Testing available upon request • Available immediately Read more: https://www.jerrycurtin.com/machine/en-134518/wohlenberg-137-guillotine-cutter
Ringwood
United Kingdom
The World of Print at your Fingertips
The Machine Dalal Mobile Apps
Download our Machine Dalal App Regular updates from our magazine with illustrations, innovations , commodities, history, media, art and a whole lot more from the magnificent world of Print.
Get the App